Automotive Tools & Equipment Sets

Loosen / remove stubborn lug nuts For trucks, buses, RVs, semi-trucks, heavy duty vehicles (not cars) Patterned rubber grip Black Oxide Steel 6 Po...

Bending Length: 4 Feet Capacity: 22 Gauge Mild Steel Beam Lift: 1" Weight: 350 lbs Folding legs and lift handles, allow this brake to be put o...

1/2" Flexible hose with spring Grease injector needle 1-1/2" Needle nose adapter 4" Needle nose adapter Grease gun adapter Grease gun coupler...

C Frame Screw Assembly All Adapters Needed for Replacing Pressing Type Upper Control Arm Bushing on Most Late Model of Ford, GM and Chrysler Ve...

Perfect for repairing punctured tires for vehicles, handcarts, wheelbarrows and more 1-piece of T-Handle Insert Tool 1-piece of T-Handle Spiral P...

Powered by your car's 12 volt battery Electric Scissor Jack with 2000 pound or one ton lifting capacity Electric Impact Wrench with 380 n.m. tor...

Uses your vehicles 12 volt power system Electric Scissor Jack with 4000 pound or two ton lifting capacity Electric Impact Wrench with 380 n.m. t...

Pullers: 1" to 1-7/8", 1-5/16 to 2-3/8", 1-3/8" to 2-7/8" Pulling Tools to Quickly Remove Semi-Floating Rear Axel Bearing Washer Captures the Bear...

Silicone Dampened Gauges Set of 3 Color Coded 5 ft Hoses Professional R134a Manual Couplers Re-Calibrateable Gauges Use For Refrigerant: R22 / R40...

Easy To Read Gauges Has Reading of R12 R22 R134a R502 Complete Diagnostic and Service Gauge Set For Use On Air Condition Systems 3 Color Freon Ser...

Bearing Separator and Bolt: 30 mm ~ 50 mm with Bolt: 3/8" x L 120 mm x 24 T and 50 mm ~ 75 mm with Bolt 1/2" x 135 mm x 20 T 4 pc Main Rod One ...

1/4"- 15ft /lb (20nm), 5/16"-15FT-LB (20nm), 3/8"- 25ft /lb (33nm), 7/16"- 25 FT-LB (33nm) Works on screw without head, Screw up, Pull Up Does ...

6 mm- 15 FT-LB (20nm), 8 mm-15 FT-LB (20nm), 10 mm- 25 FT-LB (33nm), 12 mm- 25 FT-LB (33nm) Works on screw without head, Screw up, Pull Up Does...

Services Quick-Disconnect Fittings for Ford, Chrysler and GM Ideal for servicing heater hoses, AC and fuel lines and transmission oil coolers W...

One (1) piece Pitman arm puller One (1) piece Tie rod end puller and pitman arm puller for compact cars One (1) piece universal ball joint sepa...

Replaces clutches found on FS6, C171, 6P and 148 compressors GM, R4 and A6, HR6 and DA-6 and V5 A/C compressors, Sanden compressors SD505, 507, 5...

16 Super Bright LEDs can be seen 1/2 mile away Rechargeable 700 mAh ~ 3.7V lithium ion batteries Waterproof Temperature Range : -32F TO 240F 9 Fla...

This 4 piece Inner Tie Rod Tool Set allows you to replace the inner tie rod without having to remove the rack and pinion Replace the Inner Tie R...

Works On The Inner Tie Rods with Inaccessible Wrench Flats Seven Crows Feet Sizes 1-3/16", 1-1/4", 1-5/16", 1-7/16", 14 mm, 17 mm and 33.6 mm This...

Ideal for rotting piston back into caliper to provide clearance for new pads Durable and easy to use Can be used on most imported and domesti...

Ideal For Removing and Installing Valve Springs Without Having To Removal The Cylinder Head On The Engine With Mult-Point Adjustable Tool Secure T...

Reduces The Refill Time of Radiator Cooling Systems Prevents Air Flow Into The System No More Bleeding Saves Clean Up Time Easy to Connect With Ai...

Quickly Test Cylinder Pressure Test Output Pressure From 0 - 300 psi. Push Button Pressure Release Come With Easy To Read 2 1/2" Diameter Gaug...

Comprehensive Kit For Separating Automotive AC Hose and Fuel Lines Suitable For A Wide Variety Of Domestic and Foreign Automobiles Works With Popu...